Deliverability7 min read
Why do my emails go to spam? 5 causes and fixes
Short answer
Emails go to spam when the receiving provider does not trust the sender. The usual causes are missing SPF, DKIM or DMARC records, a list that bounces, too many spam reports, recipients who never asked for your mail, and recipients who never open it. Check your authentication and your spam rate in Google Postmaster Tools first, then clean the list.
Key takeaways
- Google asks every sender to set up SPF or DKIM, and senders above 5,000 Gmail messages a day to set up SPF, DKIM and DMARC.
- Google's guidance recommends a spam rate below 0.10% and says to avoid 0.30% or higher.
- Amazon SES says providers read a high bounce rate as a badly managed list, so remove dead addresses before you send.
- Send only to people who opted in, and consider removing recipients who never open your mail.
- Verification fixes bounces only. Authentication, consent and engagement need separate fixes.
Why do emails land in spam in the first place?
A mailbox provider such as Gmail or Yahoo decides for every message whether it belongs in the inbox. Providers do not publish their formulas. Four groups of signals come up in their guidance and in everyday sending practice, and your emails go to spam when one or more of them looks bad.
- Authentication: proof that you may send from your domain (SPF, DKIM, DMARC).
- Reputation: how often your mail bounces and how often people report it as spam.
- Recipient behavior: whether people read your messages or ignore them.
- Content: what the message says and links to.
Google's Postmaster Tools dashboard shows spam rate, reputation, authentication and delivery errors. The sections below take each cause in turn.
Are your SPF, DKIM and DMARC records missing?
Missing authentication is the first thing to check, because fixing it costs only DNS edits. Google's sender guidelines say every sender needs SPF or DKIM. Anyone who sends more than 5,000 messages a day to Gmail addresses needs SPF, DKIM and DMARC, and the From domain must align with the SPF or DKIM domain. A DMARC policy of p=none is enough.
Yahoo asks for the same pattern: SPF or DKIM from all senders, and both plus a DMARC policy from bulk senders. Google also expects valid forward and reverse DNS for the sending IP and a TLS connection from all senders. The post on Gmail and Yahoo requirements for bulk senders lists each rule. Mailchimp's help center also recommends sending from an address on your own domain instead of a free mailbox.
Does your list contain addresses that bounce?
A hard bounce happens when you send to an address that does not exist. Amazon SES's documentation says email providers read a high bounce rate as a sign that the sender does not manage the recipient list properly. Old, mistyped and made-up addresses all produce hard bounces.
SES counts hard bounces only. It recommends a rate below 5%, puts the account under review at 5% and might pause sending at 10%. Those limits apply to SES customers. Other platforms set their own, and the bounce rate guide explains how to read yours.
Sending tools clean up after the damage. Mailchimp's help center says that in most cases it removes hard-bounced addresses from your audience automatically and excludes them from future sends. By then the bounce already counts against you. Checking addresses before the send avoids it.
Are too many people reporting your mail as spam?
Google's guidance recommends a spam rate below 0.10% and says to avoid 0.30% or higher. Every click on “Report spam” raises that rate, and 0.10% equals one report per 1,000 messages. Yahoo and Amazon SES publish limits of their own:
- Yahoo: below 0.3%. Yahoo computes the rate from mail delivered to the inbox only, so your own numbers can differ. Its Complaint Feedback Loop is the tool for monitoring complaints.
- Amazon SES: best below 0.1%. At 0.1% or more SES puts the account under review, and at 0.5% or more sending might be paused.
A hidden unsubscribe link pushes people toward the spam button. Google asks bulk senders for one-click unsubscribe (the List-Unsubscribe and List-Unsubscribe-Post headers) plus a visible link in the message. Yahoo asks bulk senders to honor unsubscribes within 2 days and to require no login.
Did your recipients ever ask for your emails?
People who never signed up do not expect your mail, and some of them will report it. Yahoo's best practices say to send only to users who requested your mail, to avoid buying lists and pre-checked opt-in boxes, and to use confirmed (double) opt-in. Google's Postmaster Tools help also says to make sure recipients opt in.
Amazon SES's documentation says never to purchase, rent or borrow recipient lists. It adds that purchased lists can contain spamtrap addresses, and that its terms of service prohibit sending to them.
A verification tool cannot make such a list acceptable. It tells you which addresses can receive mail. Whether their owners agreed to hear from you is a separate question. The post on buying email lists covers the risks in detail.
What if nobody opens your emails?
Mail that nobody opens is a problem you can fix by removing those recipients. Google's Postmaster Tools help says to consider unsubscribing recipients who don't open or read your messages.
Amazon SES's documentation says to purge addresses that haven't interacted with your emails recently. Yahoo suggests reconfirmation emails for inactive subscribers. Both steps leave you a smaller list of people who still want your mail. Some inactive addresses are also abandoned ones, because people change jobs and drop old inboxes.
Which symptom points to which cause?
Start with the numbers your tools already show. Postmaster Tools reports spam rate, reputation, authentication and delivery errors, and your sending tool reports bounces. The table matches common symptoms to the causes above.
| Symptom | Likely cause | First fix |
|---|---|---|
| Bounce notices after every send | Old, mistyped or made-up addresses | Verify the list and remove addresses that bounced |
| Spam rate in Postmaster Tools near 0.3% | Recipients did not ask for the mail or cannot unsubscribe easily | Send to opted-in contacts only and add one-click unsubscribe |
| Spam folder at Gmail and Yahoo even with a clean list | SPF, DKIM or DMARC missing or not aligned | Check the records and align the From domain with them |
| Spam placement began after you imported a new list | Recipients never opted in | Stop sending to that list and rebuild it with double opt-in |
| Opens drop month after month | Inactive recipients on the list | Remove or reconfirm recipients who do not open |
| Postmaster Tools shows no data | Daily volume too low for the dashboard | Use the bounce and complaint reports of your sending tool |
What should you do this week?
Work through these steps in order. Each one answers a cause above.
- Open Google Postmaster Tools and read your spam rate, authentication and delivery errors.
- Verify that SPF, DKIM and DMARC pass for your sending domain and that the From domain aligns.
- Review the bounce report of your latest campaigns and remove every hard-bounced address.
- Clean the rest of the list before the next send, for example with the list cleaning checklist.
- Remove or reconfirm recipients who have not opened your mail within a cut-off you choose, based on how often you send.
- Add one-click unsubscribe headers and a visible unsubscribe link to every marketing email.
Frequently asked questions
Why do my emails go to spam even though my list is clean?
A clean list removes bounces only. Spam folder placement can still come from missing SPF, DKIM or DMARC, spam reports, or recipients who never asked for your mail. Check authentication first, then your spam rate in Google Postmaster Tools, which Google says should stay below 0.30%.
What spam complaint rate is too high?
Google recommends a spam rate below 0.10% and says to avoid 0.30% or higher. Yahoo asks for below 0.3%. Amazon SES puts accounts under review at a 0.1% complaint rate and might pause sending at 0.5%. Providers measure slightly differently, so track the rate in your own tools too.
Do I need SPF, DKIM and DMARC to avoid spam?
Google requires SPF or DKIM from every sender. Bulk senders, meaning more than 5,000 messages a day to Gmail addresses, need SPF, DKIM and DMARC. Yahoo expects SPF, DKIM and a DMARC policy from bulk senders. A policy of p=none is accepted, so you can start without blocking anything.
Can a high bounce rate send my emails to spam?
It can hurt your standing with providers. Amazon SES's documentation says they read a high bounce rate as a sign that the sender does not manage the list properly. SES recommends a hard-bounce rate below 5% and reviews accounts at 5%. Removing invalid addresses before each send keeps the rate low.
Does email verification fix spam folder problems?
It fixes one cause: addresses that bounce. Verification adds no authentication, consent or engagement. Use it before a send to remove dead addresses, and fix the other causes separately.